ALPHA 0.1
Early testing build: Explore designs and report issues. Cutting and feature-ring construction instructions are not validated for production use.Testing guide & feedback ↗
Ring 5Blade 0° · Miter 15°
02 / VISUALIZE
Maple & Purpleheart Bowl
Interactive 3D · drag to orbit · scroll to zoom
DRAG TO ROTATE · SCROLL TO ZOOM
9 rings · 108 segments
DESIGN WORKBENCH / PATTERN EDITOR
Make it your own
Paint each trapezoid segment. Rows are rings from top to bottom; columns wrap around each ring.
Paint with
Hard Maple
This editor changes the wood species of standard trapezoidal segments, not their geometry. Use the Feature Ring Designer for diamond/chevron face geometry; validated shop construction plans remain a separate milestone.
TURNING STUDIO / GEOMETRIC PATTERNS
Feature Ring Designer
Design a motif and inspect each physical, through-depth wooden prism in the new 3D billet builder. Export the dimensions of the individual pieces and an actual-size flat face layout.
✦ Geometry-aware pattern editor
← one repeating unit →Vertical direction = ring heightClick polygons to color • Add a cut by choosing two points

01 · Choose the wood species

02 · Modify the actual shapes

Choose a layout to create a feature ring.
This motif repeats around the selected ring. To remove the pattern from this or any other ring, use the visible Remove feature button in the right-side ring list.
04 / PHYSICAL CONSTRUCTION

Piece-by-piece billet builder & cutting recipe

Turn your motif into a dimensioned, flat-faced mosaic billet. Each colored region becomes one through-depth wooden prism. Assemble the billet first; then cut the ring wedge miters. Explore the pieces before cutting.

Physical prism geometry · beta
Unit billet front width—
Billet height—
Radial blank thickness—
Pieces in full feature ring—
3D billet assemblyIndividual solid prisms · pre-miter
Recommended construction sequence
  1. Prepare straight, square, dimensioned stock at the specified radial thickness.
  2. Cut each labeled face polygon and maintain full radial depth. Match each piece to the scaled layout before gluing.
  3. Dry-fit and glue the mosaic into a rectangular billet with square top, bottom and outside face.
  4. After curing, cut the billet into the ring’s radial trapezoid wedge using the listed miter angle; dry-fit all units before glue-up.
  5. Glue units into a complete ring, flatten the faces, stack the rings, and turn the final profile, preserving the planned allowances.
Unit piece scheduleSelect a piece to inspect
Choose a part to see its true dimensions and face-edge angles.
06 / VISUAL CUTTING GUIDE

From pattern to wooden ring

EARLY CONCEPT DIAGRAMS ONLY — use the v9 Fabrication Worksheet below for waste-side kerf offsets and sacrificial end tabs. All dimensions follow your selected ring.

1 / 6

07 / FEATURE RING FABRICATION · V9.1

Diamond geometry & cutting layout · verification

Choose a diamond feature ring, then see the finished geometry, waste-side blade paths, realistic stock allowances and wedge closure. Independent math checks are shown below. Real saw settings, workholding, and cutting sequence still need physical validation.

GEOMETRY CHECKED
Choose a ring with a standard Diamond Mosaic feature to generate a manufacturing worksheet.
Material estimator · selected ring only
This is a geometry-based fabrication planning method, not validated power-tool instructions. Verify grain, glue-up method, part handling, kerf and safe operations before cutting.
Prototype scope: the billet builder creates a genuine dimensioned through-depth prism construction for the flat unit before the radial miters. It does not solve saw sequencing, clamping, accurate turned motif distortion, stock nesting, or production validation. The actual-size SVG is a pre-miter face layout, never an automatic saw or CNC toolpath.
8.00″
Finished diameter
5.25″
Finished height
108
Ring segment positions
15.00°
Saw miter per end
CEDARCAD QUALITY TEST · SIMPLE LAMINATED RING

Walnut · Maple · Walnut

This is our easier test pattern. Three straight layers make one laminated blank, which is cut into ordinary trapezoidal wedges. There are no internal diamond angles.

WALNUT
MAPLE ACCENT
WALNUT
  1. Mill three straight, compatible strips with the grain lengthwise: walnut, maple, walnut. Use the indicated rough layer heights and adequate lengths for workholding and setup.
  2. Glue the strips into a single laminated rectangular blank, and let it cure. Square/reference the blank as needed.
  3. Use the normal ring wedge settings to make the trapezoids; the maple stripe travels across the outside face. Test-fit the complete ring before gluing.
  4. Assemble the ring, flatten its faces, then check that the designed profile can be turned from the rough blank.

This is a dimensional test project, not a shop-certified cutting procedure. Extra stock for starter cuts, squaring, and holding fixtures is required. The estimated continuous-run kerf budget excludes those items; test your sled on scrap first.

05 / MACHINE SETUP ASSISTANT · SELECTED RING

Detailed saw settings & scaling

Standard wedge saw settings are shown for every ring. Feature-joint settings appear when the selected ring has a feature pattern. These are geometric references, not shop-certified cutting procedures.

Final wedge · blade tilt0.00°Blade vertical
Final wedge · miter gauge15.00°From square / ± both ends
Final wedge: Set the blade perpendicular to the table; support the glued billet with its ring top or bottom face flat on the table, so the miter cut passes across the radial depth. Use the correct jig/stop positions for left and right wedge ends.
Important: These values describe theoretical square-to-face cuts with the chosen stock reference. They are not an automatic safe cutting sequence for individual tiny pieces. Check blade perpendicularity, workholding, clearances and whether a special sled or larger glue-up blank is needed before making a cut.
Uniformly resize the ENTIRE vessel
Changes finished diameter, height, wall and turning allowances together; preserves ring count and feature designs. Blade kerf stays unchanged because your blade doesn't get larger.
%
Choose 125% to enlarge all vessel dimensions by one quarter.
CEDARCAD / SHOP PLANNING

Materials & cut list

All rings · updates when you change the design · available on your phone without downloading anything

Wood species breakdown

Ring-by-ring cutting information

Rough dimensions shown; see the Selected Ring panel for more details.
Plain-ring stock length is an idealized one-cut-per-wedge estimate using your blade kerf; it does not include starter trims, board defects or safe cutting setup. Feature-ring components require their separate construction sheet. This is not a lumber-purchasing board-foot estimate.
SAW SETUP / CUT PLANNING

Your saw blade

Kerf is the actual width removed by the blade, not its plate thickness. Measure a test cut when possible; listed sizes are nominal examples.

Accepts decimal inches (0.098) or fractions (3/32, 1/8). Typical crosscut blade kerfs are around 0.09″–0.125″, but use your own measurement.

Planned saw slot width0.1250″